Visit StanleyEngineeredFastening.com  

Fasteners: Breakstem Rivets

Avdelmate® (Non-Structural) - Large Flange Head

Large View
Brochure
Description
Specifications
Installation Tools
Interactive Demo
Materials
(Rivet / Stem / Tubular)
Sizes Product Series Data Sheets
Aluminium / Aluminum / Aluminum 3/16, 1/4 BALMS Imperial - Metric
Aluminium / Steel / Aluminum 3/16, 1/4 BSLMS Imperial - Metric
Steel / Steel / Steel 3/16, 1/4 SSLMS Imperial - Metric



Description

The Avdelmate® rivet is a two-piece, non-structural breakstem rivet consisting of a rivet and a tubular component. Although they are in the blind fastener family, they are not blind fasteners as access is required from both sides of the workpiece to install the rivet and tubular component. Each component is inserted from opposite sides of the application such that the rivet component inserts into the tubular component.

When the rivet is installed, the two components are held together by a bulge created as the mandrel head is pulled through the rivet. It should be clear that the strength of a joint created in this manner is not as strong as other breakstem rivets. Therefore, the Avdelmate® rivet must only be used in applications with hollow centers, such as joining tubing and fastening road signs to the post, or extremely soft solid materials or assemblies, such as cardboard or foam honeycomb structures. However, because the joint is contained within the application, there is some level of tamper resistance and the tubular and rivet component have the same head configuration so the finished look is the same from both sides. And with no protruding rivet tail on the blind side, there is a level of safety inherent to the Avdelmate® rivet that isn't present in other breakstem rivets.

Features

  • Extra-wide grip range from 15.8 mm to 98.4 mm (5/8" to 3-7/8")
  • Large bearing area against both sides of the application spreads the tail bearing load/clamp load on the rear sheet to prevent damage
  • Clamps tightly and securely without crushing parent material
  • Excellent hole fill via radially expanded rivet body for a strong and vibration resistant joint
  • Rivet stem retained in tubular component avoids loose stems
  • Low profile headform on both sides of the application for a neat appearance
Assembly Material
  • Metal to metal
  • Plastic to plastic
  • Metal to plastic
  • Metal rear sheet
  • Various composite materials
Typical Applications
  • Playground equipment
  • Furniture
  • Racks
  • Stadium seating
  • Street signs



Specifications

Find fasteners based on application parameters

Click part numbers to view suggested tools

Size Part Number Material2)
(Rivet / Stem)
Grip Hole Size D1 L1
max.
A1 B1 S D2 L2
max.
A2 B2
3/16 SSLMS-08SP-62 Aluminum / Aluminum 2.875-3.125 .312 .187 .608 .625 .095 .114 .250 3.570 .625 .095
3/16 BALMS-06BP-12 Aluminum / Aluminum .625-.750 .250 .125 .525 .375 .059 .076 .188 .585 .375 .057
3/16 BALMS-06BP-14 Aluminum / Aluminum .688-.875 .250 .125 .525 .375 .059 .076 .188 .647 .375 .057
3/16 BALMS-06BP-17 Aluminum / Aluminum .875-1.063 .250 .125 .525 .375 .059 .076 .188 .825 .375 .057
3/16 BALMS-06BP-20 Aluminum / Aluminum 1.063-1.250 .250 .125 .525 .375 .059 .076 .188 1.012 .375 .057
3/16 BALMS-06BP-23 Aluminum / Aluminum 1.250-1.438 .250 .125 .525 .375 .059 .076 .188 1.200 .375 .057
3/16 BALMS-06BP-26 Aluminum / Aluminum 1.438-1.625 .250 .125 .525 .375 .059 .076 .188 1.387 .375 .057
3/16 BALMS-06BP-29 Aluminum / Aluminum 1.625-1.813 .250 .125 .525 .375 .059 .076 .188 1.575 .375 .057
3/16 BALMS-06BP-32 Aluminum / Aluminum 1.813-2.000 .250 .125 .525 .375 .059 .076 .188 1.762 .375 .057
3/16 BALMS-06BP-35 Aluminum / Aluminum 2.000-2.188 .250 .125 .525 .375 .059 .076 .188 1.950 .375 .057
3/16 BALMS-06BP-38 Aluminum / Aluminum 2.188-2.375 .250 .125 .525 .375 .059 .076 .188 2.137 .375 .057
3/16 BSLMS-06BP-12 Aluminum / Steel .625-.750 .250 .125 .525 .375 .059 .076 .188 .585 .375 .057
3/16 BSLMS-06BP-14 Aluminum / Steel .688-.875 .250 .125 .525 .375 .059 .076 .188 .647 .375 .057
3/16 BSLMS-06BP-17 Aluminum / Steel .875-1.063 .250 .125 .525 .375 .059 .076 .188 .825 .375 .057
3/16 BSLMS-06BP-20 Aluminum / Steel 1.063-1.250 .250 .125 .525 .375 .059 .076 .188 1.012 .375 .057
3/16 BSLMS-06BP-23 Aluminum / Steel 1.250-1.438 .250 .125 .525 .375 .059 .076 .188 1.200 .375 .057
3/16 BSLMS-06BP-26 Aluminum / Steel 1.438-1.625 .250 .125 .525 .375 .059 .076 .188 1.387 .375 .057
3/16 BSLMS-06BP-29 Aluminum / Steel 1.625-1.813 .250 .125 .525 .375 .059 .076 .188 1.575 .375 .057
3/16 BSLMS-06BP-32 Aluminum / Steel 1.813-2.000 .250 .125 .525 .375 .059 .076 .188 1.762 .375 .057
3/16 BSLMS-06BP-35 Aluminum / Steel 2.000-2.188 .250 .125 .525 .375 .059 .076 .188 1.950 .375 .057
3/16 BSLMS-06BP-38 Aluminum / Steel 2.188-2.375 .250 .125 .525 .375 .059 .076 .188 2.137 .375 .057
3/16 SSLMS-06SP-12 Steel / Steel .625-.750 .250 .125 .525 .375 .059 .076 .188 .585 .375 .057
3/16 SSLMS-06SP-14 Steel / Steel .688-.875 .250 .125 .525 .375 .059 .076 .188 .647 .375 .057
3/16 SSLMS-06SP-17 Steel / Steel .875-1.063 .250 .125 .525 .375 .059 .076 .188 .825 .375 .057
3/16 SSLMS-06SP-20 Steel / Steel 1.063-1.250 .250 .125 .525 .375 .059 .076 .188 1.012 .375 .057
3/16 SSLMS-06SP-23 Steel / Steel 1.250-1.438 .250 .125 .525 .375 .059 .076 .188 1.200 .375 .057
3/16 SSLMS-06SP-26 Steel / Steel 1.438-1.625 .250 .125 .525 .375 .059 .076 .188 1.387 .375 .057
3/16 SSLMS-06SP-29 Steel / Steel 1.625-1.813 .250 .125 .525 .375 .059 .076 .188 1.575 .375 .057
3/16 SSLMS-06SP-32 Steel / Steel 1.813-2.000 .250 .125 .525 .375 .059 .076 .188 1.762 .375 .057
3/16 SSLMS-06SP-35 Steel / Steel 2.000-2.188 .250 .125 .525 .375 .059 .076 .188 1.950 .375 .057
3/16 SSLMS-06SP-38 Steel / Steel 2.188-2.375 .250 .125 .525 .375 .059 .076 .188 2.137 .375 .057
1/4 BALMS-08BP-12 Aluminum / Aluminum .625-.750 .312 .187 .442 .625 .095 .114 .250 .580 .625 .095
1/4 BALMS-08BP-14 Aluminum / Aluminum .750-.875 .312 .187 .442 .625 .095 .114 .250 .695 .625 .095
1/4 BALMS-08BP-18 Aluminum / Aluminum .875-1.125 .312 .187 .608 .625 .095 .114 .250 .820 .625 .095
1/4 BALMS-08BP-22 Aluminum / Aluminum 1.125-1.375 .312 .187 .608 .625 .095 .114 .250 1.070 .625 .095
1/4 BALMS-08BP-26 Aluminum / Aluminum 1.375-1.625 .312 .187 .608 .625 .095 .114 .250 1.320 .625 .095
1/4 BALMS-08BP-30 Aluminum / Aluminum 1.625-1.875 .312 .187 .608 .625 .095 .114 .250 1.570 .625 .095
1/4 BALMS-08BP-34 Aluminum / Aluminum 1.875-2.125 .312 .187 .608 .625 .095 .114 .250 1.820 .625 .095
1/4 BALMS-08BP-38 Aluminum / Aluminum 2.125-2.375 .312 .187 .608 .625 .095 .114 .250 2.070 .625 .095
1/4 BALMS-08BP-42 Aluminum / Aluminum 2.375-2.625 .312 .187 .608 .625 .095 .114 .250 2.320 .625 .095
1/4 BALMS-08BP-46 Aluminum / Aluminum 2.625-2.875 .312 .187 .608 .625 .095 .114 .250 2.570 .625 .095
1/4 BALMS-08BP-50 Aluminum / Aluminum 2.875-3.125 .312 .187 .608 .625 .095 .114 .250 2.820 .625 .095
1/4 BALMS-08BP-54 Aluminum / Aluminum 3.125-3.375 .312 .187 .608 .625 .095 .114 .250 3.070 .625 .095
1/4 BALMS-08BP-58 Aluminum / Aluminum 3.375-3.625 .312 .187 .608 .625 .095 .114 .250 3.320 .625 .095
1/4 BALMS-08BP-62 Aluminum / Aluminum 3.625-3.875 .312 .187 .608 .625 .095 .114 .250 3.570 .625 .095
1/4 BSLMS-08BP-12 Aluminum / Steel .625-.750 .312 .187 .442 .625 .095 .114 .250 .580 .625 .095
1/4 BSLMS-08BP-14 Aluminum / Steel .750-.875 .312 .187 .442 .625 .095 .114 .250 .695 .625 .095
1/4 BSLMS-08BP-18 Aluminum / Steel .875-1.125 .312 .187 .608 .625 .095 .114 .250 .820 .625 .095
1/4 BSLMS-08BP-22 Aluminum / Steel 1.125-1.375 .312 .187 .608 .625 .095 .114 .250 1.070 .625 .095
1/4 BSLMS-08BP-26 Aluminum / Steel 1.375-1.625 .312 .187 .608 .625 .095 .114 .250 1.320 .625 .095
1/4 BSLMS-08BP-30 Aluminum / Steel 1.625-1.875 .312 .187 .608 .625 .095 .114 .250 1.570 .625 .095
1/4 BSLMS-08BP-34 Aluminum / Steel 1.875-2.125 .312 .187 .608 .625 .095 .114 .250 1.820 .625 .095
1/4 BSLMS-08BP-38 Aluminum / Steel 2.125-2.375 .312 .187 .608 .625 .095 .114 .250 2.070 .625 .095
1/4 BSLMS-08BP-42 Aluminum / Steel 2.375-2.625 .312 .187 .608 .625 .095 .114 .250 2.320 .625 .095
1/4 BSLMS-08BP-46 Aluminum / Steel 2.625-2.875 .312 .187 .608 .625 .095 .114 .250 2.570 .625 .095
1/4 BSLMS-08BP-50 Aluminum / Steel 2.875-3.125 .312 .187 .608 .625 .095 .114 .250 2.820 .625 .095
1/4 BSLMS-08BP-54 Aluminum / Steel 3.125-3.375 .312 .187 .608 .625 .095 .114 .250 3.070 .625 .095
1/4 BSLMS-08BP-58 Aluminum / Steel 3.375-3.625 .312 .187 .608 .625 .095 .114 .250 3.320 .625 .095
1/4 BSLMS-08BP-62 Aluminum / Steel 3.625-3.875 .312 .187 .608 .625 .095 .114 .250 3.570 .625 .095
1/4 SSLMS-08SP-12 Steel / Steel .625-.750 .312 .187 .442 .625 .095 .114 .250 .580 .625 .095
1/4 SSLMS-08SP-14 Steel / Steel .750-.875 .312 .187 .442 .625 .095 .114 .250 .695 .625 .095
1/4 SSLMS-08SP-18 Steel / Steel .875-1.125 .312 .187 .608 .625 .095 .114 .250 .820 .625 .095
1/4 SSLMS-08SP-22 Steel / Steel 1.125-1.375 .312 .187 .608 .625 .095 .114 .250 1.070 .625 .095
1/4 SSLMS-08SP-26 Steel / Steel 1.375-1.625 .312 .187 .608 .625 .095 .114 .250 1.320 .625 .095
1/4 SSLMS-08SP-30 Steel / Steel 1.625-1.875 .312 .187 .608 .625 .095 .114 .250 1.570 .625 .095
1/4 SSLMS-08SP-34 Steel / Steel 1.875-2.125 .312 .187 .608 .625 .095 .114 .250 1.820 .625 .095
1/4 SSLMS-08SP-38 Steel / Steel 2.125-2.375 .312 .187 .608 .625 .095 .114 .250 2.070 .625 .095
1/4 SSLMS-08SP-42 Steel / Steel 2.375-2.625 .312 .187 .608 .625 .095 .114 .250 2.320 .625 .095
1/4 SSLMS-08SP-46 Steel / Steel 2.625-2.875 .312 .187 .608 .625 .095 .114 .250 2.570 .625 .095
1/4 SSLMS-08SP-50 Steel / Steel 2.875-3.125 .312 .187 .608 .625 .095 .114 .250 2.820 .625 .095
1/4 SSLMS-08SP-54 Steel / Steel 3.125-3.375 .312 .187 .608 .625 .095 .114 .250 3.070 .625 .095
1/4 SSLMS-08SP-58 Steel / Steel 3.375-3.625 .312 .187 .608 .625 .095 .114 .250 3.320 .625 .095
1/4 SSLMS-08SP-62 Steel / Steel 3.625-3.875 .312 .187 .608 .625 .095 .114 .250 3.570 .625 .095
Size Part Number Material2)
(Rivet / Stem)
Grip Hole Size D1 L1
max.
A1 B1 S D2 L2
max.
A2 B2


1) typical values
2) tubular component material matches rivet



Installation Tools

Search tools by fastener part number

Part numbers are listed in order of base tool (no nose equipment), nose assembly, nose tip, complete tool (includes nose equipment).
Size Series Installation Tools
(Standard setups. Contact Avdel® for options.)
nG3 nG4 eRiv®
3/16 BALMS
BSLMS
SSLMS
71224-02000
71210-15000
07340-06201
71224-00120
71234-02000
71210-15000
07340-06201
71234-00120
---
---
71603-02053
71603-00105
1/4 BALMS
BSLMS
SSLMS
71224-02000
71210-15000
07612-02001
71224-00021
71234-02000
71210-15000
07612-02001
71234-00261
---
---
71603-02055
71603-00105



Interactive Demo

• BSLMS - Large Flange head - Aluminum rivet / Steel stem / Aluminum tubular component