Visit StanleyEngineeredFastening.com  

Installation Tools

7539 (Hydro-Pneumatic)

Large View
Description
Fastener Range
Literature
Interactive Demo
Setup
Power Supply: Hydraulic Oil & Air
Air Pressure: 87 psi
Nose Equipment: Nose equipment, mandrel and spring purchased separately.
Performance
Cycle Time: approximately 1 seconds
Noise Level: 75 dB(A)


Download the tool manual for dimensional and other performance specs



Description

The 7539 series can place the entire range of Avdel® Speed Fastening® Systems and stand out for their ergonomic design. Rapid assembly makes them cost-effective, even with small batch sizes. Simple to operate, high mobility and easy integration into the production process are the main features. Time consuming training of an operator is not necessary. The hydraulic riveting units provide a smooth and shockfree riveting, ideal for sensitive components. All tools only require compressed-air supply. Respective nose equipment has to be ordered seperately.


Type 07539-03000 - Tool Stand Workstation

This tool is used for “Top-Down” riveting requirements. The benefit: easy alignment of workpiece due to linear control and fatigue-proof operation. The tool is mainly used in a seated work position.

Operating radius: 240 - 6000 mm Height of post: 1.150 mm
Pull-out length: 260 mm Hose length: 3.000 mm

Type 07539-03001 - Underbench Workstation

The 07539-03001 is integrated into existing assembly workstations. The tool is especially suitable for components with “Bottom-Up” riveting requirements. The components are positioned on the previously fed rivet. Jig points required for the components can be designed more easily.

Type 07539-03005 - Suspended Tool

For different riveting directions on the same component the tool is mounted via a balancer (balancer part-no. 78230-00005 has to be ordered separately). You can carry out up to 60 riveting processes per minute. An extension with a tool stand is optional. The tool weighs about 1.5 kg.



Fastener Range

Search tools by fastener part number

Part numbers represent standard tool setups. Contact Avdel® for options.
Fastener Size Material Base Tool
(No Nose Equipment)
Nose Assembly Mandrel Spring Complete Tool
(Includes Accessories)
Chobert®
(Double Flush)
3.2mm Steel 1) 07537-03100 07150-08004 07271-06630 ---
Avlug® 3/32 Brass 1) 07170-04500 07150-06603 07150-06803 ---
1/8 Brass 1) 07170-04600 07150-06604 07150-06804 ---
Avsert® 2.5mm Brass 1) 07150-03003 07150-06003 07150-06803 ---
3mm Brass 1) 07170-04600 07150-06004 07150-06804 ---
Avtronic® 2.5mm All 1) 07150-03003 07170-06025 07150-06803 ---
3mm All 1) 07271-05600 07170-06028 07170-06528 ---
Briv® 3/32 All 1) 07170-04500 07150-06013 07150-06803 ---
1/8 All 1) 07170-04600 07271-06414 07150-06814 ---
5/32 All 1) 07170-04700 07150-06015 07170-06875 ---
6mm All 1) 07170-05600 07150-06018 07150-06846 ---
Chobert® 3/32 All 1) 07170-04500 07150-06003 07150-06803 ---
1/8 All 1) 07170-04600 07150-06004 07150-06804 ---
5/32 All 1) 07170-04700 07150-06005 07170-06875 ---
3/16 All 1) 07170-04800 07150-06006 07170-06876 ---
1/4 All 1) 07150-03008 07150-06008 07150-06808 ---
Chobert®
(Double Flush)
3.2mm Steel 1) 07537-03100 07150-08004 07271-06630 ---
Grovit® 3/32 All 1) 07170-04500 07150-06003 07150-06803 ---
1/8 All 1) 07170-04600 07150-06004 07150-06804 ---
5/32 All 1) 07170-04700 07150-06005 07170-06875 ---
Neospeed™ 1/8 All 1) 07530-03200 07530-06014 07150-06814 ---
5/32 All 1) 07530-03300 07530-06015 07170-06875 ---
3/16 All 1) 07530-03400 07530-06016 07170-06876 ---
Rivscrew® 2.8mm Steel 1) 07271-03000 07271-06030 07271-06630 ---
3mm Steel 1) 07271-03000 07271-06030 07271-06630 ---
3.5mm Steel 1) 07271-03500 07271-06035 07271-06635 ---
4mm Steel 1) 07271-04000 07271-06140 07271-06640 ---
Rivscrew® PL 3mm Steel 1) 07271-03000 07279-06429 07271-06630 ---
3.5mm Steel 1) 07271-03000 07279-06429 07271-06630 ---
4mm Steel 1) 07150-03005 07271-06035 07271-06635 ---
4.5mm Steel 1) 07150-03005 07271-06140 07271-06640 ---
Fastener Size Material Base Tool
(No Nose Equipment)
Nose Assembly Mandrel Spring Complete Tool
(Includes Accessories)


1) Select base tool number from the configurations outlined in the product description.



Literature

• Marketing Brochure
• Parts List
• Nose Equipment
• Complete Manual



Interactive Demo

Speed Fastening® Systems